CardMaker newsletter
Subscribe

Fishy Bites free pattern

Fishy Bites

By Lisa Johnson

Materials

Fishy Bites free pattern
  • Diner 5 1/2-inch-square turquoise crackled card with envelope, prepurchased
  • Card stock: white, white pearlescent
  • Printed card stock: Diner Jukebox double-sided, yellow/blue polka dots
  • Scrap paper
  • Just Add Water embossed card-stock stickers (includes lobster, shark, starfish and waves)
  • Summertime double-sided ribbon
  • Blue fine-tip marker
  • Tinkerbell alphabet foam-mount stamps
  • Four Circles rubber stamp
  • Chalk ink pads: green, blue
  • Large silver round snap
  • Eyelet punch and setter
  • Clear glitter glue
  • Adhesive foam tape
  • Fabric glue
  • Instant-dry paper glue
  • Computer and printer (optional)
1. Ink card edges with green chalk ink. Cut a 5 1/2 x 1-inch strip of white pearlescent card stock; use blue chalk ink to stamp "you're INVITED" on card-stock strip, leaving extra room at left end. Stamp "for a bite" with the same ink on a scrap piece of white pearlescent card stock; cut angled shapes around each word.
2. Cut two pieces of Diner Jukebox printed card stock, one measuring 2 x 3 1/4 inches and the other measuring 1 1/8-inch square. Ink edges of both pieces on green crackled side with green chalk ink. Ink circles stamp with green chalk ink and stamp once on scrap paper; stamp circles on bottom third of card and randomly on card-stock pieces, re-inking as needed. Embellish with glitter glue as desired; let dry. Adhere large piece of stamped card stock to upper right corner of card; adhere card-stock square to lower left corner.
3. Adhere "you're INVITED" strip to card 1 1/4 inches above bottom edge. Attach waves sticker to card along top edge of "you're INVITED" strip; trim edges. Use fabric glue to adhere ribbon to bottom edge of "you're INVITED" strip, wrapping and adhering ends inside card. Punch a hole through left end of "you're INVITED" strip and set round snap.
4. Use foam tape to attach shark and starfish stickers and "for a bite" words to card as shown.
5. For inside card, hand-print, or use a computer to generate, party invitation information on a 4 3/4 x 4 3/4-inch piece of white card stock. Adhere to yellow/blue polka-dot printed card stock; trim a small border and adhere to inside panel. Attach lobster sticker to lower right corner. Embellish envelope with waves sticker; trim sticker edges.

Sources: Card, printed card stock, stickers, ribbon, round snap and Crop-A-Dile eyelet punch and setter from We R Memory Keepers; rubber stamp from Hampton Art; chalk ink pads from Clearsnap Inc.; fabric glue and instant-dry paper glue from Beacon Adhesives Inc.

Copyright © June 2007 CardMaker magazine. All rights reserved.


Until next time,
Pam Marra signature

Sue Reeves
Editor, CardMaker newsletter

Did you receive this message from a friend? You can sign up to get your own FREE copy of CardMaker e-newsletter by clicking here.

Privacy/security

Your privacy matters to us. Click here to read our privacy pledge.

Terms of Use

Mailing address: DRG. 306 East Parr Road, Berne, IN 46711.

© 2009 DRG. All rights reserved.